Solder Cream Mixer

Solder Fume removal

Solder Inspection

Batch & In-Line Cleaners

Ultrasonic Stencil Cleaner

Laser Solder Thickness Measurement

SMT and PCB Equipment

Equipment Selection Panel V

GAM12n SMT Chip Counter

Solder Cream Mixer GAM60/60A

Reflow Oven Temperature Profile Checker GAM200A

SMT Feeder Calibration Jig Machine GAM20

Centrifuge Bubble Removal Machine GAM62A

Vision Added Measurement Inspection System VAMIS GAM800C

GAM 30 Vee Cut Separator

Laser Vision Measurement for Solder Paste GAM 70

Stencil Hole Ultra Sonic Cleaner GAM40

Drill Bit Ring-Setting Automatic Measurement and Inspection Machine GAM80M

GAM12n SMT Chip Counter

GAM12n SMT Chip Counter   ^

●Counting the quantity of parts is fully automatic, convenient for inventory management.

●Reel derailment protection device prevents tapes falling off. It is easy to adjust by tightening and loosening.

●Graphic LCD screen display for setting parameters and reading data.

●Compact, light weight, easy to carry.

●�Count to� quantity of parts can be set.

● Easy operation, no environmental pollution.

Optional G2018 Barcode

● Bar code.

● Printing paper

● Ribbon

Application

● Used for taped Surface Mount components.

● Reel diameter: assorted sizes are usable.

● Reel Width: 8,12,16,24,32,44 and 56mm

● Reel Pitch: 2,4,8,12,16,20,24,32,44,48,52 and 56mm

Electric Power

Dimensions D x W x H (mm)

Weight

AC110V/60Hz, AC220V/50Hz, 30W

289�419�177 mm

6 Kgs

GAM20 Feeder  Calibration Jig Machine

     ● Feeder simulation available
     ● Effectively prevent the missing chip problem from imprecise feeder
     ● Adjust feeder precision in simulation mode
     ● Easy viewing of process

Request More information on GAM20

Features

● Suitable for various types and models of feeder.

● Simulates machine operation.

● Feeder adjustment is done during simulation.

● May be customized for feeders not shown below.

Contact SintroNex

Inspection Items

● Check for wheel position in the tape feed direction.

● Check and calibrate the wheel position.

● Check for function and position of eject pin.

● Check for yielding force of the parts cassette clamp.

Specification of GAM20 Calibration Jig Machine

Display

Correction

Master Jig

Operation

Air pressure

Power

Weight

CCD Monitor

Inner cross-hair sight

As required by feeder model

Adjustable speed control

5 Kg/cm2

110V / 220VAC

35Kg

GAM 20 Series Standard Applications

GAM 20
GAM 20P
GAM 20Q
GAM 20PQ
GAM 20PLM

PANASERT

K-TYPE
K-TYPE
Q-TYPE
P/Q
L+M Size

Motor
Air
Air
Air
Air

GAM 20F

FUJI

CP6
CP7

Air
Air

GAM 20S

SANYO

1025

Air

GAM 20K82(92)
GAM 20K85L
GAM 20K86
GAM 20K88

KME

KME 82. 92 compatible
KME 85L
KME 86
KME 88

Air
Air
Air
Air

GAM 20J

JUKI

JUKI 750
JUKI 760
JUKI 2010

Air
Air

GAM 20Y

YAMAHA

YV-100
YV-100 II

Air
Air

Information contained in this page is subject to change without notice

GAM30 V-Cut Separator

     ● High performance removal of bubbles from adhesive
     ● Universal Holder for all types of dispense tubes
     ● Large clear countdown display
     ● Adjustable spin time
     ● Compact system with low power usage

  Request More information on GAM30

GAM40 SMT Stencil Hole Cleaning Machine

     ● On-Line stencil hole cleaning
     ● Ultrasonic solder paste removal
     ● Easy to operate

Request More information on GAM40

Features of GAM40

�     Provides an immediate cleaning capability to the steel stencil on-line; ensures the quality in continuous printing.

�     Cleans thoroughly the dirt located at the corners and edges.

�     Compact design and easy operation.

�     Upgrades the printing quality

�      No need for CFC solvent, no environmental pollution

�     Cleans steel holes thoroughly by ultrasonic vibration, without harming the steel stencil.

�     Overcomes the blind spot of auto-clean (dry/wet), cleans all solder paste on Fine-Pitch steel holes.

      ● Universal fixturing for tube or jar
     ● Parts Sorting Option
     ● High Precision at 2 microns
     ● Set up for inspection based on needs via Windows Interface

Request More information on GAM60/60A

      ● High performance removal of bubbles from adhesive
     ● Universal Holder for all types of dispense tubes
     ● Large clear countdown display
     ● Adjustable spin time
     ● Compact system with low power usage

     Request More Information on GAM62A

     ● Measurement of the solder area, cross-section and volume
     ● Various kinds of statistical charts based on needs
     ● Ideal inspection of solder paste thickness
     ● Thickness distribution chart, X-bar minus R control chart
     ● Process capability index Cp, Cpm, Cpk
     ● Inspection for length and thickness of other kinds of materials

Request More information on GAM70

        Measurement and Inspection System:

     ● Automatic operation w/ ring setting, diam. inspection
     ● Effective drill bit length and frontal surface inspection
     ● Unique image process checks for defective drill bits
     ● Universal drill bit carry box
     ● Easy to learn Windows interface
 

Request More information on GAM80M

     ● Windows interface Software
     ● 4 or 6 channels of temperature measurement for the reflow oven
     ● Single button operation
     ● Powerful software provides temperature curve, time analysis
 

Request More information on GAM200A

     ● Dimension Measurement
     ● Vision Comparison
     ● Coordinate reading
     ● Negative Measurement

Request More information on GAM800C